WARNING
Keep the car locked, with the rear seatback and trunk lid securely latched when not in use, and prevent children's access to car keys.
Key operation

To open the trunk lid, turn the key clockwise. To close the trunk lid, lower and push the trunk lid down securely.

To open the trunk, unlock it with one of the following operations:

WARNING
Keep the car locked, with the rear seatback and trunk lid securely latched when not in use, and prevent children's access to car keys.
The trunk lid release is located on the floor to the left of the driver's seat.
To open the trunk lid, pull the opener lever up.
To close the trunk lid, lower and push the trunk lid down securely.

WARNING
Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they could be seriously injured. Keep the car locked, with the rear seatback and trunk lid securely latched when not in use, and prevent children's access to car keys.
The interior trunk lid release mechanism provides a means of escape for children and adults in the event they become locked inside the trunk.
To open the trunk from the inside, pull the illuminated release handle until the lock releases and push up on the trunk lid. The release handle is made of a material that glows in the dark after a brief exposure to ambient light.
The handle is located inside the trunk compartment on the trunk lock at the center of the trunk lid.
Hood1. Pull the hood lock release handle 1 located below the instrument panel until the hood springs up slightly. 2. Locate the lever 2 in between the hood and grille and push the lever sideways w ...

Opener operation The fuel-filler door release is located below the instrument panel. To open the fuel-filler door, pull the release. To lock, close the fuel-filler door securely. Fuel-filler ...
Malfunction indicator lamp
Component Function Check
1.CHECK MIL FUNCTION
Turn ignition switch ON.
Make sure that MIL lights up.
Is the inspection result normal?
YES >> INSPECTION END
NO >> Go to EC, "Diagnosis Procedure".
Diagnosis Procedure
1.CHECK DTC
Check that DTC UXXXX is not display ...
P0977 Shift solenoid B
DTC Logic
DTC DETECTION LOGIC
DTC
Trouble diagnosis name
DTC detection condition
Possible causes
P0977
Shift Solenoid B Control Circuit
High
The following diagnosis conditions
are met, and the TCM low
clutch solenoid valve current
monitor reading is 200 ...