WARNING

To engage: Pull the parking brake lever up A .
To release: 1. Firmly apply the foot brake.
2. Manual transmission models: Place the shift lever in the N (Neutral) position.
Continuously Variable Transmission (CVT) / Automatic transmission models: Move the shift lever to the P (Park) position.
3. While pulling up on the parking brake lever slightly, push the button B and lower the lever completely.
4. Before driving, be sure the brake warning light goes out.
Fuel level sensor unit
Disassembly and Assembly
Fuel Level Sender Unit
1. Harness connectors 2. Level sending unit module 3. Fuel temperature sensor
4. Float arm assembly
Disassembly
NOTE:
Before disassembly, note the proper placement of the wires to the correct
terminals and correct wire routing to
the term ...
P0974 Shift solenoid A
DTC Logic
DTC DETECTION LOGIC
DTC
Trouble diagnosis name
DTC detection condition
Possible causes
P0974
Shift Solenoid "A" Control Circuit
High
The following diagnosis conditions
are met, and the TCM select
switch ON-OFF solenoid
valve monitor value is OF ...