Nissan Versa (N17): Service data and specifications (SDS)

Nissan Versa 2nd generation (N17) Service Manual / Transmission & driveline / Clutch (CL) / Service data and specifications (SDS)

General Specifications

Engine type		HR16DE
Type of clutch control		Hydraulic
Clutch disc	Facing size (Outer dia. × Inner dia. × Thickness)	200 × 140 × 3.1 (7.87 × 5.51 × 0.122)
Recommended clutch fluid		Refer to MA, "Fluids and Lubricants".

Clutch Pedal

Clutch Disc

Clutch Cover

Clutch disc and clutch cover

Exploded View 1. Flywheel 2. Clutch disc 3. Clutch cover 4. Input shaft A. First step B. Final step : Apply lithium-based grease including molybdenum disulphide. ...

Other materials:

C1607, C1608 EPS Control unit
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test. >> GO TO 2 ...

Torsion bar
TORSION BAR : Removal and Installation REMOVAL 1. Remove torsion bar clamp. 2. Support trunk lid with a suitable tool. WARNING: Bodily injury may occur if trunk lid is not supported properly when removing the torsion bars. 3. Apply a torsion bar wrench (A) to torsion bar (1) and lift torsi ...

Nissan Versa (N17): Service data and specifications (SDS)

Clutch disc and clutch cover

Precautions

Other materials:

Categories