Nissan Versa (N17): Power door lock system

Nissan Versa 2nd generation (N17) Service Manual / Body exterior, doors, roof & vehicle security / Door & lock (DLK) / Power door lock system

POWER DOOR LOCK SYSTEM : System Diagram

POWER DOOR LOCK SYSTEM : System Diagram

POWER DOOR LOCK SYSTEM : System Description

DOOR LOCK FUNCTION

Functions Available by Operating the Door Lock and Unlock Switches on Driver Door and Passenger Door

  • Interlocked with the locking operation of door lock and unlock switch, door lock actuators of all door lock actuators are locked.
  • Interlocked with the unlocking operation of door lock and unlock switch, door lock actuators of all door lock actuators are unlocked.

Functions Available by Operating the Key Cylinder Switch on Driver Door

  • Interlocked with the locking operation of door key cylinder, door lock actuators of all door lock actuators are locked.

Selective Unlock Operation

  • When door key cylinder is unlocked, door lock actuator driver side is unlocked.
  • When door key cylinder is unlocked for the second time within 5 seconds after the first operation, door lock actuators on all doors are unlocked.

Select unlock operation mode can be changed using DOOR LOCK-UNLOCK SET mode in "WORK SUPPORT".

Refer to BCS "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)".

Automatic door lock/unlock function

AUTOMATIC DOOR LOCK/UNLOCK FUNCTION : System Diagram AUTOMATIC DOOR LOCK/UNLOCK FUNCTION : System Description DOOR LOCK FUNCTION The door lock and unlock switch (driver side) is built i ...

Remote keyless entry system

REMOTE KEYLESS ENTRY SYSTEM : System Diagram REMOTE KEYLESS ENTRY SYSTEM : System Description The remote keyless entry system can be locked and unlocked by pressing door lock and unlock ...

Other materials:

Timing chain
Exploded View 1. Timing chain slack guide 2. Timing chain tensioner 3. Camshaft sprocket (EXH) 4. Camshaft sprocket (INT) 5. Plug 6. Front oil seal 7. Crankshaft pulley 8. Crankshaft pulley bolt 9. Front cover 10. Crankshaft sprocket 11. Crankshaft sprocket key 12. Oil pump sprocket 13. O ...

Additional service when replacing ECM
Description When replacing ECM, the following procedure must be performed. PROGRAMMING OPERATION NOTE: After replacing with a blank ECM, programming is required to write ECM information. Be sure to follow the procedure to perform the programming. Work Procedure 1.CHECK ECM PART NUMBER Che ...

Categories


© 2017-2026 Copyright www.niveguide.com
0.0082