SHIFT LOCK SYSTEM : Component Parts Location
1. Stop lamp switch 2. Shift lock release lever 3. Park position switch 4. Shift lock solenoid
Component | Function |
Stop lamp switch | Stop lamp switch turns ON when brake pedal is depressed |
Shift lock release lever | Manually releases the shift lock |
Park position switch | Detects that the selector lever is in "P" position. |
Shift lock solenoid | Operates according to the signal from the stop lamp switch and moves the lock lever. |
CVT CONTROL SYSTEM CVT CONTROL SYSTEM : Component Parts Location 1. IPDM E/R 2. TCM 3. Transmission range switch 4. Primary speed sensor 5. CVT unit 6. Output speed sensor 7. Secondary speed s ...
TRANSAXLE TRANSAXLE : Cross-Sectional View 1. Converter housing 2. Oil pump 3. Counter drive gear 4. Control valve 5. Oil pan 6. Primary pulley 7. Steel belt 8. Secondary pulley 9. Planeta ...
Trunk lid opener actuator
Component Function Check
1.CHECK FUNCTION
Select INTELLIGENT KEY of BCM using CONSULT.
Select TRUNK/GLASS HATCH in ACTIVE TEST mode.
Touch OPEN to check that it works normally.
Is the inspection result normal?
YES >> Trunk lid opener actuator is OK.
NO >> Refer to DLK " ...
U1000 CAN COMM
DTC Logic
DTC DETECTION LOGIC
NOTE: U1000 can be set if a module harness was disconnected and
reconnected, perhaps during a repair. Confirm that there are actual CAN
diagnostic symptoms and a present DTC by performing the Self Diagnostic Result
procedure.   ...