Engine

This spark ignition system complies with the Canadian standard ICES-002.
Wheels and tires

Dimensions and weights

Recommended fluids/lubricants and capacitiesThe following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure described in the "Do-it-yourself" section to determine the pro ...

When planning to drive your NISSAN vehicle in another country, you should first find out if the fuel available is suitable for your vehicle's engine. Using fuel with an octane rating that is too ...
Front wheel hub and knuckle
Inspection
Check the axle and suspension parts for excessive play, wear, or damage.
Shake each front wheel to check for excessive play as shown.
FRONT WHEEL BEARING INSPECTION
Move wheel hub and bearing assembly in the axial direction by hand. Make
sure the axial end play is withi ...
Vacuum lines
Exploded View
1. Clamp 2. Vacuum hose 3. Vacuum piping
A. To brake booster B. Paint mark C. To intake manifold
Removal and Installation
REMOVAL
Remove the air cleaner and duct assembly. Refer to EM "Exploded View".
Remove the vacuum hose and vacuum piping.
INSTALLATION
...