Toyota
Nissan Versa
 Sedan Service Manual
Brakes » Brake system (BR) » Rear drum brake
Disassembly and Assembly

DISASSEMBLY

  1. Remove the boot from wheel cylinder. Refer to BR "Exploded View".
  2. Remove the piston, piston cup and spring from wheel cylinder.

    CAUTION: Pull the piston out from the wheel cylinder to prevent the wheel cylinder inner wall from being damaged.

  3. Remove piston cup from piston.
  4. Perform inspection after disassembly. Refer to BR "Inspection and Adjustment".

ASSEMBLY

  1. Apply rubber grease to the piston cup (1) and boot (2).
  2. Install piston cup and boot to piston (3).

CAUTION:

  • Do not mistake the direction.
  • Do not reuse piston cup and boot.
  1. Apply new brake fluid to piston and wheel cylinder inner wall, and install spring, piston cover, piston to wheel cylinder.

    CAUTION: Do not damage the wheel cylinder inner wall.

  2. Install the boot to wheel cylinder. Refer to BR "Exploded View".
  3. Perform inspection after assembly. Refer to BR "Inspection and Adjustment".

ASSEMBLY

    More about «Rear drum brake»:

    Removal and Installation

    Disassembly and Assembly

    Inspection and Adjustment

    Nissan Versa Sedan Service Manual / Brakes / Brake system (BR) / Rear drum brake / Disassembly and Assembly

    Nissan Versa Sedan Service Manual

    Categories


    © 2017-2024 Copyright www.niveguide.com