Nissan Versa (N17): Fender cover

Nissan Versa 2nd generation (N17) Service Manual / Body exterior, doors, roof & vehicle security / Door & lock (DLK) / Fender cover

FENDER COVER : Removal and Installation

REMOVAL

1. Fully open hood assembly.

2. Disengage pawls beginning at the front of the fender cover and working toward the rear of vehicle and then remove front fender cover.

CAUTION: When performing the procedure after removing fender cover, protect the lower windshield glass with urethane etc.

: Pawl

REMOVAL

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

For installation, engage pawls to front fender and cowl top cover in numerical order shown.
Install so that there is no clearance between windshield and cowl top cover.

INSTALLATION

FRONT DOOR

Exploded View

Exploded View

1. Front door assembly 2. Grommet 3. Striker bolt 4. Door striker 5. Bumper rubber 6. Door check link 7. Door hinge (lower) 8. Door hinge (upper) 9. Grommet (Driver side only)

Front fender

FRONT FENDER : Removal and Installation CAUTION: Use a shop cloths to protect the body from being damaged during removal and installation. REMOVAL Remove fender protector. Refer to EXT " ...

Other materials:

U0101 can comm circuit
Description CAN (Controller Area Network) is a serial communication line for real time application. It is an onvehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each con ...

P0980 Shift solenoid C
DTC Logic DTC DETECTION LOGIC DTC Trouble diagnosis name DTC detection condition Possible causes P0980 Shift Solenoid C Control Circuit High The following diagnosis conditions are met, and the TCM 2-4 brake solenoid valve current monitor reading is 200 mA ...

Nissan Versa (N17): Fender cover

Front fender

Door assembly

Other materials:

Categories