Nissan Versa (N17): Fuel filler lid lock

Nissan Versa 2nd generation (N17) Service Manual / Body exterior, doors, roof & vehicle security / Door & lock (DLK) / Fuel filler lid lock

FUEL FILLER LID LOCK : Removal and Installation

REMOVAL

1. Fully open fuel filler lid.

2. Remove trunk side finisher (LH). Refer to INT "TRUNK SIDE FINISHER : Removal and Installation".

3. Release pawls (A) and remove fuel filler lid lock assembly (1) from opening.

CAUTION: Be careful not to damage gasket (2) when removing.

REMOVAL

4. Disconnect fuel filler lid opener cable (1) by pulling downward and then sliding cable end to the side to remove from fuel filler lid lock assembly (2).

REMOVAL

INSTALLATION

Installation is in the reverse order of removal.

CAUTION: After installation, check fuel filler lid assembly open/close, lock/unlock operation.

Fuel filler opener cable

FUEL FILLER OPENER CABLE : Removal and Installation REMOVAL 1. Remove hood and fuel filler handle assembly bolts (A). 2. Disconnect fuel filler lid opener cable (2) by pulling downward and th ...

Door switch

Exploded View 1. Door switch 2. Door switch bolt Removal and Installation REMOVAL 1. Remove the door switch bolt (A). 2. Disconnect the harness connector from door switch (1) and remove. ...

Other materials:

Instrument panel
1. Headlight/turn signal switch/fog light switch (if so equipped) 2. Driver's supplemental air bag (P. 1-39) Horn 3. Meters and gauges. Warning and indicator lights 4. Wiper and washer switch 5. Vents 6. Rear window defroster switch 7. Front passenger air bag status light 8. Hazard warn ...

Installing front license plate
Use the following steps to mount the front license plate: Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag: License plate bracket License plate bracket screws x 2 Screw grommets x 2 1. Hold the license plate bracket 1 and make a ...

Nissan Versa (N17): Fuel filler lid lock

Fuel filler opener cable

Door switch

Other materials:

Categories