Nissan Versa (N17): Intelligent key battery

Nissan Versa 2nd generation (N17) Service Manual / Body exterior, doors, roof & vehicle security / Door & lock (DLK) / Intelligent key battery

Removal and Installation

1. Release the lock knob at the back of the Intelligent Key and remove the mechanical key.

2. Insert a suitable tool (A) wrapped with a cloth into the slit of the corner and twist it to separate the upper part from the lower part.

CAUTION:

Do not touch the circuit board or battery terminal.
The key fob is water-resistant. However, if it does get wet, immediately wipe it dry.

Removal and Installation

3. Replace the battery with new one.

Battery replacement :Coin-type lithium battery (CR2025)

Removal and Installation

4. Align the tips of the upper and lower parts, and then push them together until it is securely closed.

CAUTION:

When replacing battery, keep dirt, grease, and other foreign materials off the electrode contact area.
After replacing the battery, check that all Intelligent Key functions work normally.

WITHOUT INTELLIGENT KEY SYSTEM

Other materials:

Panic alarm function does not operate
Diagnosis Procedure 1.CHECK REMOTE KEYLESS ENTRY FUNCTION Check remote keyless entry function. Does door lock/unlock with Intelligent Key button? YES >> GO TO 2. NO >> Refer to DLK "Diagnosis Procedure". 2.CHECK HORN OPERATION Select IPDM E/R using CONSULT. Select ...

Inside handle
INSIDE HANDLE : Removal and Installation REMOVAL 1. Remove front door finisher. Refer to INT "Removal and Installation". 2. Remove upper side of sealing screen. NOTE: Cut the butyl tape so that some parts of the butyl tape remain on the sealing screen, if the sealing screen is reus ...

Nissan Versa (N17): Intelligent key battery

Outside key antenna

Precautions

Other materials:

Categories