Nissan Versa (N17): Outside key antenna

Nissan Versa 2nd generation (N17) Service Manual / Body exterior, doors, roof & vehicle security / Door & lock (DLK) / Outside key antenna

Outside handle

OUTSIDE HANDLE : Removal and Installation

REMOVAL

1. Remove the outside handle. Refer to DLK "OUTSIDE HANDLE : Removal and Installation".

2. Remove the handle cover screw, handle cover and door antenna.

REMOVAL

INSTALLATION

Installation is in the reverse order of removal.

Rear bumper

REAR BUMPER : Removal and Installation

REMOVAL

1. Remove the rear bumper fascia. Refer to EXT "Removal and Installation".

2. Remove clips (A) and the outside key antenna (rear bumper) (1).

REMOVAL

INSTALLATION

Installation is in the reverse order of removal.

INTELLIGENT KEY WARNING BUZZER

Removal and Installation

REMOVAL

Remove bolt (A) and the Intelligent Key warning buzzer (1).

REMOVAL

INSTALLATION

Installation is in the reverse order of removal.

REMOTE KEYLESS ENTRY RECEIVER

Removal and Installation

REMOVAL

1. Remove the glove box. Refer to IP "Removal and Installation".

2. Remove the remote keyless entry receiver bolt (A).

3. Disconnect the harness connector from remote keyless entry receiver and remove remote keyless entry receiver (1)

REMOVAL

INSTALLATION

Installation is in the reverse order of removal.

Inside key antenna

Intelligent key battery

Removal and Installation 1. Release the lock knob at the back of the Intelligent Key and remove the mechanical key. 2. Insert a suitable tool (A) wrapped with a cloth into the slit of the corner ...

Other materials:

Diagnosis and repair workflow
Workflow OVERALL SEQUENCE DETAILED FLOW 1.INTERVIEW CUSTOMER Interview the customer to obtain as much information as possible about the conditions and environment under which the malfunction occurred. >> GO TO 2. 2.SYMPTOM CHECK Verify symptoms. >> GO TO 3. 3.CHECK FOR DT ...

Door hinge
DOOR HINGE : Removal and Installation REMOVAL CAUTION: Use two people when removing or installing front door due to its heavy weight When removing and installing front door assembly, support the door using a suitable tool. Use shops cloths to protect surrounding components from damag ...

Categories


© 2017-2025 Copyright www.niveguide.com
0.0089