Nissan Versa (N17): P1148 closed loop control

Nissan Versa 2nd generation (N17) Service Manual / Engine / Engine control system (EC) / P1148 closed loop control

DTC Logic

DTC DETECTION LOGIC

NOTE: DTC P1148 is displayed with DTC for A/F sensor 1.

When the DTC is detected, perform the trouble diagnosis of DTC corresponding to A/F sensor 1.

DTC No.	Trouble diagnosis (Trouble diagnosis content)	DTC detecting condition	Possible cause
P1148	CLOSED LOOP-B1 (Closed loop control function)	The closed loop control function does not operate even when vehicle is being driven in the specified condition.	Harness or connectors (A/F sensor 1 circuit is open or shorted.) A/F sensor 1 A/F sensor 1 heater

Diagnosis Procedure

DTC P1148 is displayed with DTC for A/F sensor 1.

When the DTC is detected, perform the trouble diagnosis of DTC corresponding to A/F sensor 1.

Refer to EC, "DTC Index".

P1078 EVT control position sensor

P117A air fuel ratio

Other materials:

Cooling fan control
Cooling fan control : system diagram Cooling fan control : system description INPUT/OUTPUT SIGNAL CHART Sensor Input signal to ECM ECM function Actuator Crankshaft position sensor (POS) Camshaft position sensor (PHASE) Engine speed*1 Piston position Cool ...

Lock-up control
LOCK-UP CONTROL : System Description SYSTEM DIAGRAM DESCRIPTION Controls for improvement of the transmission efficiency by engaging the torque converter clutch in the torque converter and eliminating slip of the converter. Achieves comfortable driving with slip control of the t ...

Nissan Versa (N17): P1148 closed loop control

P1078 EVT control position sensor

P117A air fuel ratio

Other materials:

Categories