Nissan Versa
Sedan Service Manual
Body exterior, doors, roof & vehicle security » Door & lock (DLK)
Remote keyless entry function

REMOTE KEYLESS ENTRY FUNCTION : System Description

SYSTEM DIAGRAM

REMOTE KEYLESS ENTRY OPERATION

The Intelligent Key has the same functions as the remote control entry system. Therefore, it can be used in the same manner as the remote controller by operating the door lock/unlock button.

Remote keyless entry system controls operation of the following items.

Auto door lock
Door lock/unlock
Hazard and buzzer reminder
Panic alarm
Trunk lid open

OPERATION AREA

To check that the Intelligent Key works normally, use within 1 m (3 ft) range of each door, however the operable range may differ according to surroundings.

DOOR LOCK/UNLOCK FUNCTION

When door lock/unlock button of the Intelligent Key is pressed, lock signal or unlock signal is transmitted from Intelligent Key to BCM via remote keyless entry receiver.
BCM receives the signal and compares it with the registered key ID to the vehicle.
BCM transmits door lock/unlock signal to each door lock actuator and operates each door lock actuator, when key ID matches. At the same time, BCM blinks hazard warning lamps (lock: 1 time, unlock: 2 times) and sounds Intelligent Key buzzer (lock: 1 time, unlock: 2 times) as a reminder.

OPERATION CONDITION

TRUNK OPEN FUNCTION

When trunk button of the Intelligent Key is pressed, the trunk open signal is transmitted from the Intelligent Key to the BCM via remote keyless entry receiver.
When BCM receives the trunk open request signal, it operates the trunk lid opener actuator and opens the trunk.

OPERATION CONDITION

*: Pattern of trunk open button can be selected using CONSULT. Refer to BCS "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)".

PANIC ALARM FUNCTION

When ignition switch is OFF, BCM transmits theft warning horn request signal to IPDM E/R. Then, IPDM E/R turns on and off horn intermittently.

The horn sounds intermittently.

The alarm automatically turns off.

After 25 seconds
When BCM receives any signal from Intelligent Key

How to Change Panic Alarm Operation Mode

Refer to BCS "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)".

HAZARD AND BUZZER REMINDER FUNCTION

For the operation check, BCM blinks hazard warning lamps (lock: 1 time, unlock: 2 times) and sounds Intelligent Key warning buzzer (lock: 1 time, unlock: 2 times) when door lock or unlock operates by each remote controller button operation of Intelligent Key.

How to Change Hazard and Buzzer Reminder Mode

Refer to BCS "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)".

AUTO DOOR LOCK FUNCTION

After door is unlocked by Intelligent Key button operation and if 30 seconds or more passes without performing the following operation, all doors are automatically locked. However, operation check function does not activate.

Auto door lock mode can be changed by the "AUTO LOCK SET" mode in "WORK SUPPORT". Refer to BCS "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)".

LIST OF OPERATION RELATED PARTS

Parts marked with × are the parts related to operation.

More about «Door & lock (DLK)»:

Nissan Versa Sedan Service ManualBody exterior, doors, roof & vehicle security » Door & lock (DLK)Remote keyless entry function

Remote keyless entry function

Nissan Versa Sedan Service Manual

Nissan Versa
Sedan Service Manual
Body exterior, doors, roof & vehicle security » Door & lock (DLK)
Remote keyless entry function