Seat belt warning systemSeat Belt Warning System Does Not Function 1.SEAT BELT WARNING LIGHT Turn ignition switch ON. Does the seat belt warning lamp come ON? YES >> GO TO 2 NO >> Check 10A fuse [No. 3, ...
EVAP leak check
Inspection
CAUTION:
Do not use compressed air or a high pressure pump.
Do not exceed 4.12 kPa (0.042 kg/cm2, 0.6 psi) of pressure in EVAP
system.
NOTE:
Do not start engine.
Improper installation of EVAP service port adapter [commercial
service tool: (J-41413-OBD)] to the EVAP ...
Auto door lock operation does not
operate
Diagnosis Procedure
1.CHECK AUTO LOCK SET SETTING IN WORK SUPPORT
Select INTELLIGENT KEY of BCM using CONSULT.
Select AUTO LOCK SET in WORK SUPPORT mode.
Check AUTO LOCK SET setting in WORK SUPPORT.
Refer to BCS "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)".
...