WARNING: Do not touch bulb with your hand while it is on or right after being turned off. Burning may result.
CAUTION: Do not touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent damage to the bulb.
REMOVAL
1. Remove the center console assembly. Refer to IP "Removal and Installation".
2. Rotate shift selector lamp assembly (1) counter-clockwise and remove.
Front
INSTALLATION
Installation is in the reverse order of removal.
WARNING: Do not touch bulb with your hand while it is on or right after being turned off. Burning may result.
CAUTION:
SHIFT SELECTOR LAMP BULB
Removal
1. Remove shift selector lamp. Refer to IP "Removal and Installation".
2. Pull shift selector bulb from bulb socket (1).
Front
Installation
Installation is in the reverse order of removal.
Exploded View 1. Trunk room lamp 2. Bulb Front Pawl ...
P0744 Torque converter
Description
This DTC is detected when the torque converter clutch solenoid valve is
electrically normal but the torque converter
clutch does not engage. This is not due to an electrical malfunction (circuit
open or shorted), but is
instead due to a mechanical malfunction (sticking of the cont ...
Brake caliper assembly
BRAKE CALIPER ASSEMBLY : Exploded View
REMOVAL
1. Brake caliper assembly
DISASSEMBLY
1. Cap 2. Bleeder valve 3. Cylinder body
4. Piston seal 5. Piston 6. Piston boot
7. Sliding pin 8. Sliding pin boot 9. Bushing
10. Torque member Apply rubber
grease Apply brake fluid
NOTE:
LH front ...