Nissan Versa (N17): Steering system (ST)

Other materials:

Additional service when replacing TCM
Description Always perform the following items when the TCM is replaced. LOADING OF THE CALIBRATION DATA The TCM acquires calibration data (individual characteristic value) of each solenoid that is stored in the ROM assembly (in the control valve). This enables the TCM to perform accur ...

Line pressure test
Work Procedure INSPECTION Inspect the amount of engine oil. Replenish the engine oil if necessary. Refer to LU, "Inspection". Drive for about 10 minutes to warm up the vehicle so that the A/T fluid temperature is to 50 to 80C (122 to 176F). Inspect the amount of ATF. Rep ...