Nissan Versa

 Sedan Service Manual

Driver information & multimedia » Meter, warning lamp & indicator (MWI) » Diagnosis system (combination meter)
Consult Function

APPLICATION ITEMS

CONSULT can display each diagnostic item using the diagnostic test modes shown.

SELF DIAG RESULT

Refer to MWI "DTC Index".

DATA MONITOR

Display Item List

NOTE: Some items are not available according to vehicle specification.

SPECIAL FUNCTION

Special menu                   

W/L ON HISTORY

• Stores histories when warning/indicator lamp is turned on.
• "W/L ON HISTORY" indicates the "TIME" when the warning/ indicator lamp is turned on.
• The "TIME" above is:

- 0: The condition that the warning/indicator lamp has been turned on 1 or more times after starting the engine and waiting for 30 seconds.

- 1 - 39: The number of times the engine was restarted after the 0 condition.

- NO W/L ON HISTORY: Stores NO (0) turning on history of warning/indicator lamp.

NOTE:

• W/L ON HISTORY is not stored for approximately 30 seconds after the engine starts.
• Brake warning lamp does not store any history when the parking brake is applied or the brake fluid level gets low.

Display Item

ECU DIAGNOSIS INFORMATION

COMBINATION METER

Reference Value

VALUES ON THE DIAGNOSIS TOOL

*: Displays "OFF" if the brake warning lamp is illuminated when the valve check starts, the parking brake switch is turned ON or the brake fluid level switch is turned ON.

NOTE: Some items are not available according to vehicle specification.

TERMINAL LAYOUT

PHYSICAL VALUES

Fail-Safe

The combination meter activates the fail-safe control if CAN communication with each unit is malfunctioning.

DTC Index

BCM (BODY CONTROL MODULE)

List of ECU Reference

ECU	Reference
BCM	BCS "Reference Value"
	BCS "Wiring Diagram"
	BCS "Fail-safe"
	BCS "DTC Inspection Priority Chart"
	BCS "DTC Index"

WIRING DIAGRAM

METER SYSTEM

Wiring Diagram

BASIC INSPECTION

Diagnosis Description

Consult Function