Nissan Versa (N17): Door hinge

Nissan Versa 2nd generation (N17) Service Manual / Body exterior, doors, roof & vehicle security / Door & lock (DLK) / Door hinge

DOOR HINGE : Removal and Installation

REMOVAL

CAUTION:

Use two people when removing or installing front door due to its heavy weight
When removing and installing front door assembly, support the door using a suitable tool.
Use shops cloths to protect surrounding components from damage during removal and installation of front door assembly.

Remove front fender. Refer to DLK "FRONT FENDER : Removal and Installation".
Remove front door assembly. Refer to DLK "DOOR ASSEMBLY : Removal and Installation".
Remove front door hinge bolts (body side) and remove front door hinge.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

Apply anticorrosive agent onto the hinge mating surface.
Perform the front door adjustment procedure. Refer to DLK "DOOR ASSEMBLY : Adjustment".
After adjusting, apply touch-up paint (the body color) to the head of door hinge nuts.
Check door hinge rotating point for poor lubrication. If necessary, apply a suitable multi-purpose grease.

INSTALLATION

Door check link

DOOR CHECK LINK : Removal and Installation REMOVAL Fully close the front door window. Remove front door finisher. Refer to INT "Removal and Installation". Remove front door speake ...

Other materials:

A/C On signal
Component Function Check 1.CHECK A/C ON SIGNAL With CONSULT Turn ignition switch ON. Operate front blower motor. Select "AIR CONDITIONER" of "BCM" using CONSULT. Select "AIR COND SW" in "DATA MONITOR" mode, and check status under the following condition. Is t ...

Torsion bar
TORSION BAR : Removal and Installation REMOVAL Remove torsion bar clamp. Support trunk lid with a suitable tool. WARNING: Bodily injury may occur if trunk lid is not supported properly when removing the torsion bars. 3. Apply a torsion bar wrench (A) to ...

Nissan Versa (N17): Door hinge

Door assembly

Door check link

Other materials:

Categories