Nissan Versa (N17): Hazard and buzzer reminder does not operate

Nissan Versa 2nd generation (N17) Service Manual / Body exterior, doors, roof & vehicle security / Door & lock (DLK) / Hazard and buzzer reminder does not operate

Diagnosis Procedure

1.CHECK HAZARD ANSWER BACK SETTING IN WORK SUPPORT

  1. Select INTELLIGENT KEY of BCM using CONSULT.
  2. Select HAZARD ANSWER BACK in WORK SUPPORT mode.
  3. Check the HAZARD ANSWER BACK setting in WORK SUPPORT.

    Refer to BCS "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)".

Is the inspection result normal?

YES >> GO TO 2.

NO >> Set the Lock Only, Unlock Only or Lock/Unlock in HAZARD ANSWER BACK.

2.CHECK ANS BACK I-KEY LOCK SETTING IN WORK SUPPORT

  1. Select INTELLIGENT KEY of BCM using CONSULT.
  2. Select ANS BACK I-KEY LOCK in WORK SUPPORT mode.
  3. Check the ANS BACK I-KEY LOCK setting in WORK SUPPORT.

    Refer to BCS "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)".

Is the inspection result normal?

YES >> GO TO 3.

NO >> Set the Horn Chirp or Buzzer in ANS BACK I-KEY LOCK.

3.CHECK ANS BACK I-KEY UNLOCK SETTING IN WORK SUPPORT

  1. Select INTELLIGENT KEY of BCM using CONSULT.
  2. Select ANS BACK I-KEY UNLOCK in WORK SUPPORT mode.
  3. Check the ANS BACK I-KEY UNLOCK setting in WORK SUPPORT.

    Refer to BCS "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)".

Is the inspection result normal?

YES >> GO TO 4.

NO >> Set the On in ANS BACK I-KEY UNLOCK.

4.CHECK HAZARD FUNCTION

Check hazard function.

Refer to DLK "Component Function Check".

Is the inspection result normal?

YES >> GO TO 5.

NO >> Repair or replace the malfunctioning parts.

5.CHECK INTELLIGENT KEY WARNING BUZZER

Check Intelligent Key warning buzzer.

Refer to DLK "Component Function Check".

Is the inspection result normal?

YES >> GO TO 6.

NO >> Repair or replace the malfunctioning parts.

6.REPLACE BCM

  1. Replace BCM. Refer to BCS "Removal and Installation".
  2. Confirm the operation after replacement.

Is the result normal?

YES >> Inspection End.

NO >> Check intermittent incident. Refer to GI "Intermittent Incident".

IGN OFF Interlock door unlock function does not operate

Diagnosis Procedure 1.CHECK AUTOMATIC LOCK/UNLOCK SELECT SETTING IN WORK SUPPORT Select DOOR LOCK of BCM using CONSULT. Select AUTOMATIC LOCK/UNLOCK SELECT in WORK SUPPORT mode. Check AUTOM ...

Key reminder function does not operate

Diagnosis Procedure 1.CHECK ANTI KEY LOCK IN FUNCTI SETTING IN WORK SUPPORT Select INTELLIGENT KEY of BCM using CONSULT. Select ANTI KEY LOCK IN FUNCTI in WORK SUPPORT mode. Check ANTI KEY LO ...

Other materials:

Center console assembly
Exploded View 1. M/T console boot (M/T models) 2. Center console assembly Removal and Installation REMOVAL Move shift selector to "N" position (CVT models or A/T models). Remove shift selector handle and console boot (M/T models). Raise parking brake lever. Remove center console ...

Trunk lid opener handle
TRUNK LID OPENER HANDLE : Removal and Installation REMOVAL 1. Remove front kicking plate (LH). Refer to INT "KICKING PLATE INNER : Removal and Installation". 2. Disengage pawl using a suitable tool (A) and open the harness clip. : Pawl 3. Position floor carpet aside as necessary ...

Categories


© 2017-2025 Copyright www.niveguide.com
0.0061