The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SR and SB sections of this Service Manual.
WARNING:
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
- Water soluble dirt:
- Oily dirt:
- Do not use organic solvent such as thinner, benzene, alcohol or gasoline.
- For genuine leather seats, use a genuine leather seat cleaner.
PREPARATION
Special Service Tool
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Commercial Service Tool
SYSTEM DESCRIPTION
VENTILATION SYSTEM
VENTILATION SYSTEM (FRONT AIR CONDITIONING)
VENTILATION SYSTEM (FRONT AIR CONDITIONING) : System Description
OUTLINE
The ventilation system is controlled by the A/C control. For details of the air conditioner system, refer to VTL "VENTILATION SYSTEM (FRONT AIR CONDITIONING) : System Description".
AIR FLOW
Front
REMOVAL AND INSTALLATION
DUCT AND GRILLE
Exploded View
1. A/C unit assembly 2. Foot duct (LH) 3. Foot duct (RH) 4. Side ventilator grille (LH) 5. Center ventilator grille (LH) 6. Cluster lid C 7. Center ventilator grille (LH) 8. Instrument panel assembly 9. Side ventilator grille (RH) 10. Center ventilator duct assembly
CENTER VENTILATOR GRILLE
CENTER VENTILATOR GRILLE : Removal and Installation
REMOVAL
INSTALLATION
Installation is in the reverse order of removal.
SIDE VENTILATOR GRILLE
SIDE VENTILATOR GRILLE : Removal and Installation
REMOVAL
INSTALLATION
Installation is in the reverse order of removal.
CENTER VENTILATOR DUCT
CENTER VENTILATOR DUCT : Removal and Installation
REMOVAL
INSTALLATION
Installation is in the reverse order of removal.
FOOT DUCT
FOOT DUCT : Removal and Installation
LEFT SIDE
Removal
Installation
Installation is in the reverse order of removal.
RIGHT SIDE
Removal
Installation
Installation is in the reverse order of removal.
Exploded View 1. A/C unit assembly 2. Blower motor 3. Blower fan resistor Removal and Installation REMOVAL Disconnect the negative battery terminal. Refer to PG "Removal and Install ...
Interior lights
The interior light has a three-position switch and
operates regardless of ignition switch position.
When the switch is in the ON position 1 , the
interior lights illuminate, regardless of door position.
The lights will go off after a period of time
unless the ignition switch is placed i ...
Idle air volume learning
Description
Idle Air Volume Learning is a function of ECM to learn the idle air volume
that keeps each engine idle speed
within the specific range. It must be performed under any of the following
conditions:
Each time electric throttle control actuator or ECM is replaced.
Idle speed or ...