Nissan Versa (N17): Tire pressure monitoring system

Nissan Versa 2nd generation (N17) Service Manual / Suspension / Road wheels & tires (WT) / Tire pressure monitoring system

TIRE PRESSURE MONITORING SYSTEM : System Diagram

TIRE PRESSURE MONITORING SYSTEM : System Diagram

TIRE PRESSURE MONITORING SYSTEM : System Description

  • The BCM has pressure judgment and trouble diagnosis functions. When the BCM detects low inflation pressure or another unusual symptom, the low tire pressure warning lamp in the combination meter is illuminated.
  • If the tire pressure is less than the specified value, the low tire pressure warning lamp illuminates.
  • The TPMS (Tire Pressure Monitoring System) is activated when vehicle speed is 40 km/h (25 MPH) or more.

INPUT/OUTPUT SIGNAL   

LOW TIRE PRESSURE WARNING LAMP CONTROL CONDITION

The BCM uses CAN communication to illuminate the low tire pressure warning lamp in the combination meter.

DIAGNOSIS SYSTEM (BCM) (WITH INTELLIGENT KEY SYSTEM)

COMMON ITEM

COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)

APPLICATION ITEM

CONSULT performs the following functions via CAN communication with BCM.   

SYSTEM APPLICATION

BCM can perform the following functions.SYSTEM APPLICATION       

Component parts

Component Parts Location 1 BCM (view with instrument panel removed) 2 Remote keyless entry receiver (view with instrument panel removed) 3 Transmitter 4 Combination meter (with type A) 5 Com ...

Air pressure monitor

AIR PRESSURE MONITOR : CONSULT Function (BCM - AIR PRESSURE MONITOR) NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Gui ...

Other materials:

Air breather hose
Removal and Installation REMOVAL Remove air duct (inlet). Refer to EM "Exploded View". Remove air breather hose from transaxle assembly. INSTALLATION Installation is in the reverse order of removal. CAUTION: Check that air breather hose is not collapsed or blocked due to ...

Diagnosis and repair workflow
Workflow OVERALL SEQUENCE DETAILED FLOW 1.INTERVIEW CUSTOMER Interview the customer to obtain as much information as possible about the conditions and environment under which the malfunction occurred. >> GO TO 2. 2.SYMPTOM CHECK Verify symptoms. >> GO TO 3. 3.CHECK FOR DT ...

Categories


© 2017-2026 Copyright www.niveguide.com
0.0053