Nissan Versa (N17): Center console lower

Nissan Versa 2nd generation (N17) Service Manual / Body interior / Instrument panel (IP) / Center console lower

Removal and Installation

REMOVAL

Remove center console assembly. Refer to IP "Removal and Installation".
Remove center console lower.

a. Place front seats in a full rearward position.

b. Remove center console lower clips (A).

REMOVAL

c. Disengage center console lower pawls and remove center console lower.

: Pawl

REMOVAL

INSTALLATION

Installation is in the reverse order of removal.

UNIT DISASSEMBLY AND ASSEMBLY

Center console assembly

Exploded View 1. M/T console boot (M/T models) 2. Center console assembly Removal and Installation REMOVAL Move shift selector to "N" position (CVT models or A/T models). Remove shift ...

Center console assembly

Exploded View 1. Power socket 2. Center console assembly 3. Center console support 4. USB port and auxiliary jack Disassembly and Assembly DISASSEMBLY Remove the center console assembly. ...

Other materials:

Power outlets
Instrument panel Console (if so equipped) The power outlets are for powering electrical accessories such as cellular telephones. The outlets are rated at 12 volt, 120W (10A) maximum. CAUTION The outlet and plug may be hot during or immediately after use. Only certain power outlets ...

Parking/parking on hills
WARNING Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. Safe parking procedures require that both the parking brake be set and the transmission placed into P (Park) or in an appropriate gear for ...

Nissan Versa (N17): Center console lower

Center console assembly

Center console assembly

Other materials:

Categories