Nissan Versa (N17): Dash side finisher
DASH SIDE FINISHER : Removal and Installation
REMOVAL
- Remove front kicking plate. Refer to INT "KICKING PLATE INNER : Removal and Installation".
- Lift up rear end of dash side finisher to disengage metal clip.
: Metal clip
3. Pull back dash side finisher to disengage dash side finisher metal clip and remove dash side finisher.
: Metal clip
INSTALLATION
Installation is in the reverse order of removal.
CAUTION: When installing dash side finisher, make sure that all metal clips are securely pressed into body panel holes.
Kicking plate inner
KICKING PLATE INNER : Removal and Installation FRONT KICKING PLATE Removal 1. Release front kicking plate pawls using a suitable tool (A) and remove front kicking ...
Body side welt
BODY SIDE WELT : Removal and Installation CAUTION: Do not excessively pull or stretch body side welts. FRONT BODY SIDE WELT Removal Remove dash side finisher. Refer to INT "DASH SIDE FI ...
Other materials:
Accelerator pedal released position
learning
Description
Accelerator Pedal Released Position Learning is a function of ECM to learn
the fully released position of the
accelerator pedal by monitoring the accelerator pedal position sensor output
signal. It must be performed each
time harness connector of accelerator pedal position senso ...
Line pressure test
Work Procedure
INSPECTION
Check the engine oil level. Replenish if necessary. Refer to LU
"Inspection".
Check for CVT fluid leaks. Refer to TM "Inspection".
Drive for about 10 minutes to warm up the vehicle so that the CVT fluid
temperature is 50 to 80C (122 to
...
Categories
- Manuals Home
- Nissan Versa Owners Manual
- Nissan Versa Service Manual
- Video Guides
- Questions & Answers
- External Resources
- Latest Updates
- Most Popular
- Sitemap
- Search the site
- Privacy Policy
- Contact Us
0.0068