Exploded View
1. Rear door panel 2. Rear door finisher 3. Rear power window switch finisher
(if
equipped)
4. Grommet Clip
Metal clip
Pawl
Removal and Installation
REMOVAL
a. Remove rear door finisher bolt (A).
b. Release rear door finisher clips and metal clips using a suitable tool (A) and remove rear door finisher as shown.
: Clip
: Metal clip
CAUTION: Apply protective tape (B) on the door panel and/or door finisher to protect from damage.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION: When installing rear door finisher, make sure the clips and metal clips are securely pressed into door panel holes.
BODY SIDE TRIM
Exploded View
1. Rear body side welt 2. Center pillar upper finisher 3. Front body side
welt
4. Front pillar finisher 5. Dash side finisher 6. Front kicking plate
7. Center pillar lower finisher 8. Rear kicking plate 9. Rear pillar finisher
Clip
Pawl
Metal clip
Exploded View 1. Front door panel 2. Front door finisher 3. Main power window and door lock/ unlock switch finisher (if equipped) 4. Front door corner finisher 5. Grommet Metal clip Clip ...
FRONT PILLAR FINISHER : Removal and Installation REMOVAL Release front pillar portion of front body side welt. Pull front pillar finisher downward as shown, using mild pressure to disengage t ...
When traveling or registering in another country
When planning to drive your NISSAN vehicle
in another country, you should first find
out if the fuel available is suitable for your vehicle's
engine.
Using fuel with an octane rating that is too low
may cause engine damage. All gasoline vehicles
must be operated with unleaded gasoline. There ...
Oil pan (upper) and oil strainer
Exploded View
1. Rear oil seal 2. Oring 3. Oil pan (upper)
4. Oil pump chain tensioner (for oil
pump drive chain)
5. Oil pump drive chain 6. Crankshaft key
7. Crankshaft sprocket 8. Oil pump sprocket 9. Oil pump
10. Oring 11. Oring 12. Oil pan drain plug
13. Drain plug washer 14. Oil pan ...