Additional service when replacing
ECM
Description
When replacing ECM, the following procedure must be performed.
PROGRAMMING OPERATION
NOTE:
After replacing with a blank ECM, programming is required to write ECM
information. Be sure to follow the procedure
to perform the programming.
Work Procedure
1.CHECK ECM PART NUMBER
Che ...
Trunk lid striker
TRUNK LID STRIKER : Removal and Installation
REMOVAL
1. Remove trunk rear plate. Refer to INT "TRUNK REAR PLATE : Removal and
Installation".
2. Remove trunk lid opener cable bolt (A) and trunk lid striker bolts
(B).
3. Remove trunk lid striker (1), disconnect trunk lid opener cabl ...