Nissan Versa (N17): Side oil seal

Removal and Installation

REMOVAL

  1. Remove front drive shaft from transaxle assembly. Refer to FAX, "Removal and Installation".
  2. Remove differential side oil seal (1) using suitable tool.

    CAUTION: Do not damage transaxle case and clutch housing.

REMOVAL

INSTALLATION

    1.   Install differential side oil seal (1) to transaxle case side (B) and clutch housing side (C) using Tool.

Dimension (L1) : 5.7 - 6.3 mm (0.224 - 0.248 in)

Dimension (L2) : 2.4 - 3.0 mm (0.094 - 0.118 in)

Tool number : KV32500QAA ( - )

CAUTION:

  • Do not reuse differential side oil seal.

  • Do not tilt differential side oil seal.

  • Do not damage clutch housing and transaxle case.

INSTALLATION

    2.   Install the front drive shaft. Refer to FAX, "Removal and Installation".

Inspection

INSPECTION AFTER INSTALLATION

Check the oil level and for oil leaks. Refer to TM, "Inspection".

Gear oil

Inspection OIL LEAKAGE Make sure that gear oil is not leaking from transaxle or around it. OIL LEVEL Remove filler plug (1) and gasket from transaxle case. Check the oil level from filler pl ...

Position switch

Removal and Installation REMOVAL Drain gear oil. Refer to TM, "Draining". Disconnect the harness connector (A) from position switch. Remove position switch from transaxle case. ...

Other materials:

Rear parcel shelf finisher
Exploded View 1. High-mounted stop lamp 2. Rear parcel shelf finisher 3. Seat belt finisher 4. Seatback latch cover 5. Top tether strap anchor 6. Top tether strap anchor finisher Front Pawl Removal and Installation REMOVAL Remove high-mounted stop lamp. Refer to EXL "Removal ...

Center console assembly
Exploded View 1. Power socket 2. Center console assembly 3. Center console support 4. USB port and auxiliary jack Disassembly and Assembly DISASSEMBLY Remove the center console assembly. Refer to IP "Removal and Installation". Remove center console support screws and cen ...

Categories


© 2017-2025 Copyright www.niveguide.com
0.0091