DISC BRAKE : Inspection
BRAKE PAD
Check the brake pads and components for any excessive wear or damage. Repair or replace any component as necessary.
Brake pad specifications : Refer to BR "Front Disc Brake".

DISC ROTOR
Check the condition of the disc rotor for any excessive wear or damage.
Repair or replace any component as necessary.
Disc rotor specifications : Refer to BR "Front Disc Brake".

CALIPER
Check the caliper and hose fittings for any leaks or damage. Repair or replace any component as necessary.

Brake fluidBRAKE FLUID : Draining CAUTION: Do not spill or splash brake fluid on painted surfaces. Brake fluid may seriously damage paint. Wipe it off immediately and wash with water if it gets on a ...

DRUM BRAKE : Inspection BRAKE LINING Check the lining thickness (A). Check the lining for excessive wear, damage, and peeling. Repair or replace any components as necessary. Brake lin ...
P0731 1GR Incorrect ratio
Description
This malfunction is detected when the A/T does not shift into 1GR position as
instructed by TCM. This is not
only caused by electrical malfunction (circuits open or shorted) but by
mechanical malfunction such as control
valve sticking, improper solenoid valve operation, etc.
DTC ...
P0712 Transmission fluid temperature
sensor A
DTC Logic
DTC DETECTION LOGIC
DTC
Trouble diagnosis name
DTC detection condition
Possible causes
P0712
Transmission Fluid Temperature
Sensor A Circuit Low
The CVT fluid temperature identified by the
TCM is 180C (356F) or more continuously
for 5 seconds or ...