Nissan Versa (N17): EVAP canister filter

Exploded View

EVAP CANISTER FILTER

1. EVAP canister vent control valve hose 2. Canister drain hose 3. EVAP canister filter

Front

Removal and Installation

REMOVAL

  1. Remove the EVAP canister protector cover.
  2. Disconnect EVAP canister vent control valve hose from EVAP canister filter.
  3. Disconnect canister drain hose from EVAP canister filter.
  4. Remove the bolt and the EVAP canister filter.

INSTALLATION

Installation is in the reverse order of removal.

EVAP canister

Exploded View 1. EVAP control system pressure sensor 2. O-ring 3. EVAP canister 4. Hose clamp 5. EVAP canister purge hose 6. EVAP vent line 7. O-ring 8. EVAP canister vent control valve 9. EVA ...

EVAP canister vent control valve

Exploded View 1. EVAP canister 2. O-ring 3. EVAP canister vent control valve 4. EVAP canister vent control valve hose Removal and Installation NOTE: The EVAP canister vent control valve can ...

Other materials:

Hazard warning flasher switch
Push the switch on to warn other drivers when you must stop or park under emergency conditions. All turn signal lights flash. WARNING If stopping for an emergency, be sure to move the vehicle well off the road. Do not use the hazard warning flashers while moving on the highway unl ...

Engine stand setting
Setting NOTE: The following procedures explain how to disassemble the engine with the engine stand fastened to the bell housing. Some steps may be different if using a different type of engine stand.     1.   Install engine to engine stand:     a. Rem ...

Categories


© 2017-2025 Copyright www.niveguide.com
0.0071