Nissan Versa (N17): Wiper refill

Nissan Versa 2nd generation (N17) Service Manual / Driver controls / Wiper & washer (WW) / Wiper refill

WIPER REFILL : Removal and Installation

REMOVAL

1. Remove wiper blade from the wiper arm. Refer to WW "WIPER BLADE : Removal and Installation".

2. From portion (A) of wiper refill (1), disengage wiper blade portion (B) and remove wiper refill in the direction indicated by the arrow as shown.

REMOVAL

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

For installation of wiper refill, check that wiper refill was not twisted while installing.
Check that wiper refill was inserted normally from the correct direction.

Wiper blade

WIPER BLADE : Removal and Installation REMOVAL 1. Lift up wiper arm and set to the position where wiper arm can be locked back. 2. Press and hold lever (A) of wiper blade (1). Pull in the direc ...

Other materials:

Valve oil seal
VALVE OIL SEAL : Removal and Installation REMOVAL Remove camshafts. Remove valve lifters. Rotate crankshaft, and set piston with valve oil seal to be removed to TDC. This will prevent the valve from dropping into cylinder. CAUTION: When rotating crankshaft, be careful to avoid ...

U1001 CAN comm circuit
Description CAN (Controller Area Network) is a serial communication line for real time application. It is an onvehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each con ...

Nissan Versa (N17): Wiper refill

Wiper blade

Wiper drive assembly

Other materials:

Categories